DESCRIPTION
The machine is composed of two main parts: the frame conveyor and the blade-operating equipment.
When the level photocell detects the bottle, the latter is "captured" and blocked by two moulds; then, the rotating blade is lowered on the bottle with a vertical motion until a circular cut is obtained on internal surface of the bottle neck.
Alternatively, you can install on the machine a side-cutting device, withadds to the rotating blade a horizontal motion when it is positioned at the cutting area.
The scrap material that is shaved off during the cutting operation is conveyed separately from the bottle.
The standard machine is supplied equipped with:
- cutting unit
- conveyor lenght 1500x150 or 200
- electric installation
- protection guards as per CE laws
- electronic check-up system
MAIN TECHNICAL FEATURES
- Approx production: 1200 - 1400 pz/h (depending on bottle features)
- Thickness of bottles in the cutting area: max 1,5 mm (+/- 0,3 mm)
- Maximum cutting diameter: 120 mm
- Maximum ovality: +/- 0,1 mm
- Bottle temperature before cutting: min. 20° max. 50°
- Rigid and uniform upper tailpiece
Products list:
-
NECK CUTTING MACHINE
Sheet -
BOTTLES DEVIATOR
Sheet -
LABELLING SYSTEMS
Sheet -
TAKE OUT UNIT FOR INJECTION BLOW MOULDING MACHINES AOKI AND NISSEI MODEL
Sheet -
MODULAR CONVEYOR BELT LINE
Sheet -
GRAVITATIONAL ORIENTER
Sheet -
LEAK TESTER INTERNAL MACHINE
Sheet -
AUTOMATIC PALLET COLLECTING TABLE
Sheet -
COLLECTING TABLE
Sheet -
HORIZONTAL CUTTER
Sheet -
LEAK TESTER
Sheet -
CAPSULE CONTROL SYSTEM
Sheet -
ROTARY CUTTER
Sheet -
NECK TO NECK CUTTER
Sheet -
VERTICAL AND SIDE CUTTING SYSTEM
Sheet -
SIDE CAM CUTTING SYSTEM FOR POLYFORM CONTAINERS
Sheet -
COOLING TOWER 28mt - 56mt
Sheet -
PRINTING EQUIPMENT
Sheet -
MOULD FOR REMOVING BOTTLE RISERS
Sheet -
CUTTING BLADES
Sheet